[FIXED] iPhone This Accessory May Not Be Supported Device Error Code Issue

iPhone This Accessory May Not Be Supported Device error code happens when the cord is disturbed. This error occurs if you were using any faulty cable (Usually a wire breaks inside). This is a type of ISO 8 bug error. This is not a problem with the hardware. If you sync or use the device while charging the battery, then your iPhone device might take longer to charge because of this error issue. From this error, the lightning connector might fall OFF and gets sweltering or not fit your device properly. This error also appears when your iDevice reaches 100% charged. This Accessory May Not Be Supported error occurs when you might have a damaged Pin on your charging port.

This error is one of the most frustrating issue problem facing by the iPhone device users. Many iPhone users are complaining about this type of error problem after upgrading to the new IOS O.S. (Operating System). When you connect your iPhone to the charging cable, then it first vibrates and then shows you this error issue. From this error, your iPhone doesn’t charge anymore.

This shows an error code message like,

This Accessory May Not Be Supported

iPhone This Accessory May Not Be Supported

Causes of iPhone This Accessory May Not Be Supported Device Error Issue:

  • IOS/iPhone error issue
  • iPad Device problem

You may also check:

Here below are some suggestions and the easy tips and tricks for easily getting rid of iPhone This Accessory May Not Be Supported Device error code problem issue from your iPhone device altogether.

How to Fix & Solve iPhone This Accessory May Not Be Supported Device Error Code Problem

1. Change your iPhone Charging Cable –

Change your iPhone Charging Cable

By changing the charging cable may solve this accessory is not supported error problem.

2. Turn ON & OFF your Airplane Mode on your iPhone –

Turn ON & OFF your Airplane Mode on your iPhone

  • Go to the settings
  • Click on the Airplane Mode option
  • Swipe once to turn ON the airplane mode
  • Wait a moment
  • Swipe again to turn OFF the airplane mode
  • That’s it, done
  • After finished, close that tab

By Turning ON and OFF of the Airplane Mode on your iPhone device can get back from iPhone This Accessory May Not Be Supported error issue.

3. Reset your iPhone Network Settings –

Reset the Network Settings

You can Reset all Network Settings from this below methods & get rid out of This Accessory is not certified issue.

  • Go to the Settings
  • Select on the General tab
  • Click on the ‘Reset Network Settings‘ option
  • After completing, close all tabs
  • That’s it, done

It will Reset all your Network Settings to fix This Accessory is not Be Supported problem.

4. Remove Dust from the Cable & the Charging Port –

Remove Dust from the Cable & the Charging Port

By removing the dust from your charging port and the cable can get back from This Accessory May Not Be Supported iPhone 6 fix problem.

5. Change your Power Supply –

Change your Power Supply

By changing your Power supply may also solve this type of this accessory is not supported by iPhone keeps popping up problem issue.

TRICKS:

1. Tricky Easy Solution (Try this once) –

Tricky Easy Solution

  • Connect the charger to your iPhone device
  • When your iPhone vibrates &,
    The error message appears
  • Hold your finger on the dismiss button
  • Pull the Charger Out
    (Keep holding)
  • Plug the Charger back &,
  • Release the finger
  • That’s it, done

By trying and using the tricky secure solutions on your iPhone device can help you to get rid out of This Accessory May Not Be Supported iPhone 5 problem.

2. Use Jailbreak Tweak to Bypass Unsupported Access (Bypass Addon) –

Use Jailbreak Tweak to Bypass Unsupported Access (Bypass Addon)

  • Download this tweak
  • Go to the Cydia
  • Search for ‘Support Unsupported Accessories 8‘ in BigBoss repository
  • After downloading, install it
  • After installing, Now you can use the cable
  • After completing, close all tabs
  • That’s it, done

By using the Jailbreak tweak to bypass unsupported access and the bypass addon can solve this iPhone keeps saying accessory not supported but nothing is plugged in issue problem.

So here these above are some solutions and methods for fixing and resolve iPhone This Accessory May Not Be Supported Device error code problem issue permanently. Hope these guides will surely help you to get back from This Accessory is Not Be Supported error.

Also, read:

If you are facing iPhone This Accessory May Not Be Supported Device error code issue or found any error problem on your PC, devices or tablet, then Comment down that error below here so that we can give you our best solutions and tips on it too surely. You can also directly Email us at [email protected]

Thanks for checking our Website ..!! 

Please Leave a Comment :-