Did you know what is Error Blue Screen DRIVER_POWER_STATE_FAILURE Windows Bugcheck PC problem or facing this type of error code problem then today you are at the right place because today here we are going to show you that how to fix and solve this kind of error code problem with our some tricky ways? I hope you like them & get rid out of this Blue Screen DRIVER POWER STATE FAILURE Windows error code problem.

This shows an error code message like,

DRIVER_POWER_STATE_FAILURE

Your PC ran into a problem & needed to restart. We’re just collecting some error information & then we will restart for you.

If you would like to know more about Blue Screen DRIVER POWER STATE FAILURE Windows than you can search online later for this error Blue Screen DRIVER_POWER_STATE_FAILURE Windows

The Blue Screen DRIVER_POWER_STATE_FAILURE Windows Error Code problem occurs when your computer goes into the sleep mode or comes out of it. It is a type of PC errors that can make a unit inoperable & also cause the user to lose their critical data. It also mostly caused due to a driver conflict. When you are going to upgrade your O.S., then also you might face this type of error code problem. From this kind of error, your PC even crashing again and again. This error problem is also called as the B.S.O.D. (Blue Screen of Death). It is a type of PC error. It might also appear due to a device driver lacking a valid digital signature. From this, your PC screen remains blank & sometimes it also restarts with the blue screen error. This Blue Screen DRIVER_POWER_STATE_FAILURE Windows error mainly occurs or displaced due to the inappropriate or incompatible driver.

Causes of Blue Screen DRIVER_POWER_STATE_FAILURE Windows Issue:

  • Windows error issue
  • PC error problem

So, here are some guidelines for quickly fixing and solving this type of Error Blue Screen DRIVER_POWER_STATE_FAILURE Windows Bugcheck PC code problem from you completely.

How to Fix & Solve Blue Screen DRIVER_POWER_STATE_FAILURE Windows Bugcheck Issue

1. Boot your Windows System PC –

Boot your System

  • Go to the start menu
  • Search or go to the ‘RUN‘ their
  • Type the ‘MSConfig‘ command there
  • Now, press Enter or press OK there
  • Click on the boot tab there
  • Under boot options, tick the Safe Boot option there
  • & Press OK button there
  • After that, click on the restart
  • That’s it, done

By booting your system, you can get rid out of this error DRIVER_POWER_STATE_FAILURE Windows 10 code problem.

2. Uninstall the Problematic Windows Drivers –

Uninstall the Problematic Drivers

  • Go to the start menu
  • Search or go to the ‘RUN‘ their
  • Click on it and opens it
  • Type the “devmgmt.msc” command there
  • Press OK or press Enter there
  • Now, a pop-up will open there
  • Expand the category & check if any devices have yellow error sign
  • If any, right-click on the error device
  • Click on the ‘uninstall‘ to uninstall it
  • After uninstalling, restart your PC
  • That’s it, done

By uninstalling the problematic drivers, you can quickly fix and solve this error DRIVER_POWER_STATE_FAILURE Windows code problem.

3. Update any Outdated Windows Drivers –

This DRIVER_POWER_STATE_FAILURE Windows error can be fixed by two of the methods; you can choose anyone or go with both two approaches.

Update your Driver Softwares DRIVER_POWER_STATE_FAILURE

  • Go to the start menu
  • Search or go to the Device Manager
  • Click on it and opens it
  • A Pop-up will open there
  • Click on the driver which you want to update or
  • Check the driver who has an error sign
  • Now, right-click on the driver
  • & click on the “Update driver software” option there
  • Now, wait for some minutes for updating it
  • After finish, close the tab
  • That’s it, done

So by trying this above pragmatic solution, you may get back from this type of DRIVER_POWER_STATE_FAILURE Windows 10 problem issue.

” OR “

Install and Update all the new available Drivers DRIVER_POWER_STATE_FAILURE

  • Go to the start menu
  • Search or go to the Control Panel
  • Click on it and opens it there
  • Now, scroll down & go to the ‘Windows Update‘ option there
  • Click on it and opens it
  • Check whether if any driver update is available,
  • If any Update it fast or
  • You can make auto-update by
  • Go to the right side there
  • Click on the ‘Change Settings‘ options there
  • A Pop-up will open there
  • Now, click on the drop-down menu there
  • & Select the “Install Updates Automatically” option there
  • After that, click on the OK button to save this configuration
  • After completing, close the tab there
  • That’s it, done

By doing these two methods can quickly fix and solve this error DRIVER_POWER_STATE_FAILURE Windows 10 code problem.

4. Run Windows PC in the Safe Mode –

Run in Safe Mode DRIVER_POWER_STATE_FAILURE

  • Go to the start menu
  • Click on the Shut-Down tab there
  • Wait for it to Shut Down completely
  • After that, remove the battery there
  • & now reinsert it again
  • After that, click on the power button to start it
  • After that, there click on the ‘Safe Mode‘ option to start in Safe Mode
  • Wait for some minutes to start
  • That’s it, done

By running Windows in the safe mode can fix and solve this error DRIVER_POWER_STATE_FAILURE Windows 7 problem.

5. Enable Legacy Advanced Boot Menu in CMD (Command Prompt) –

Enable Legacy Advanced Boot Menu DRIVER_POWER_STATE_FAILURE

  • Restart your Windows PC
  • Enter the BIOS setup & configure the system to boot from the DVD/CD drive
  • Save the modified windows bootable installation DVD into the optical media drive CD/DVD drive.
  • When prompted to ‘Press any key to boot from CD or DVD.’
  • Press any key to boot the PC from DVD support
  • On the displaced Windows setup box,
  • Click on the ‘Next‘ option there
  • On the next page, click on the ‘Repair your PC.’
  • Choose an option screen, & click on the Troubleshoot
  • On the Troubleshoot screen, click on the advanced options
  • On the advanced options screen, click on the CMD (Command Prompt)
  • On the Opened command-line interface (CLI)
  • Type C: & press Enter there
  • There, type this following command
    BCDEDIT / SET {DEFAULT} BOOTMENUPOLICY LEGACY
  • After that, Press enter there to Enable Legacy Advanced Boot Menu
  • After completing, Exit it
  • Restart your PC & eject the CD/DVD after done
  • That’s it, done

By enabling Legacy Advanced Boot Menu, you can get rid out of this error DRIVER_POWER_STATE_FAILURE Windows 8 code problem.

These are some top best tips and tricks and best solutions methods from which you can get rid out of this Error Blue Screen DRIVER_POWER_STATE_FAILURE Windows Bugcheck PC Code Problem from you permanently. I hope you like this post, and it will help you, too, from fixing this error Blue Screen DRIVER POWER STATE FAILURE Windows code problem.

If you are facing any problem or error which fixing this Error Blue Screen DRIVER_POWER_STATE_FAILURE Windows Bugcheck PC code issue any problem while fixing it, then comment down the problem below so that we can fix and solve it too in this post or the comment section here.

Leave a Valuable Comment :-