[FIXED] iPod is Disabled Connect to iTunes iPod Device Error Issue

If you enter the incorrect passcode into your iPod too many times, then the device becomes disabled. So today for this iPod is Disabled Connect to iTunes iPod Device Error code problem, we are going to show you the solutions for How to Unlock Disabled iPod problem. So if you have an iPod or iPod Touch that says that it is disabled & try again in 22768662 minutes later but you don’t have 42 years to wait then, you can check this,

So all you have to do is just check out and read this below post once thoroughly to grab the best and simple natural methods for getting rid out of this type of iPod is Disable Connect to iTunes error problem from your iPod or iPod Touch too. If your iPod touch or iPod have been disabled or it is completely locked down, then the only way you will be able to use it again is that by restoring it once.

This shows an error code message like,

iPod is Disabled Connect to iTunes

iPod is Disabled Connect to iTunes

How to Unlock Disabled iPod

Causes of iPod is Disabled Connect to iTunes iPod Device Error Code Issue:

  • Try again in 24 million minutes
  • Without iTunes
  • iPod device error

You may also read;

So, here are some quick tips & tricks and some cool step by step methods and guides for easily fixing & solving this type of iPod is Disabled Connect to iTunes iPod Device Error Code problem from you and your iPod or iPod Touch permanently.

[METHODS] How to Fix & Solve iPod is Disabled Connect to iTunes iPod Device Error Code Problem

1. By Using the Apple iTunes –

By Using the Apple iTunes

  • Connect your iPod to your PC
  • Open iTunes & select your iPod
  • Click on ‘Back-Up-Now‘ option to create a backup of your iPod
  • Click on ‘Restore iPod‘ to begin the reset
  • Select the ‘Restore from iTunes Backup‘ during the setup process
  • After completing, close the tab
  • That’s it, done

By using the Apple iTunes methods, you can quickly get back from this type of iPod is Disabled Connect to iTunes fix the problem.

If you don’t want to lose any data in the process of fixing your iPod, you can unlock disabled iPod using a tool called dr.fone — iOS System Recovery.

This dr.fone product is highly efficient, and it can be used to fix a number of other issues, even beside that of unlocking a disabled iPod. You can trust it because of the millions of loyal followers that it has.

How to Unlock Disabled iPod with dr.fone — iOS System Recovery

Step 1: Launch dr.fone

First thing first. You need to launch the dr.fone software on your computer. You’ll find several different options. Choose ‘System Recovery.’

Launch dr.fone and choose ‘system recovery’ from the menu

Step 2: Connect your iPod to the computer

Now, connect your iPod to your computer using a USB cord. dr.fone will automatically detect your iPod. Once it does, click on ‘start.’

Connect the iOS device to the computer using a cable. Once dr.fone detects the iOS device, click on ‘Start

Step 3: Enter DFU Mode

You can only unlock your disabled iPod if it’s in DFU Mode. To enter DFU mode, you need to follow the instructions precisely. Hold the Home and Power buttons together for 10 seconds. Release the Power button, but continue holding the Home button. Your device will enter DFU Mode, and dr.fone will detect that. Release Home button as well.

Enter DFU Mode

Step 4: Download and Install the correct Firmware

In the next window, you’ll have to select the correct device and the model. dr.fone will automatically detect the latest IOS update available. Click ‘Download.’ This might take some time, depending on the speed of your WiFi.

Select the correct iOS device, model dr.fone will detect the latest firmware. Click on ‘Download

 

Step 5: Unlock Disabled iPod

Once the download is complete, dr.fone will automatically start repairing your iPod and restore it. Once this is done, you can restart the iPod normally, and continue using it as if it were new.

After the download, dr.fone will continue repairing your iOS device so as to fix iTunes Error 3004 Once the repair is complete, you can restart your device, and use it like before

With this simple 5-step process, you’ll have your iPod back, completely unlocked, with all data secure. Next time, make sure that you remember your passcode. But even if you don’t, you can rest assured that you have dr.fone — iOS System Recovery to fix any and all issues that pop up.

2. By using the Apple iCloud Website –

By using the Apple iCloud Website

*Use this solution if you don’t have access to your PC.

  • Visit the iCloud.com/find on another PC or Device
  • Log in with your Apple ID
  • Click the ‘All Devices‘ button at the top of Window
  • Select your iPod from the list
  • Click on the ‘Erase‘ button & Click on ‘Confirm‘ there
  • Now, set up your iPod like a new one
  • After completing, close the tab
  • That’s it, done

By using the Apple iCloud Website & fix this by these above methods will get rid out of this iPod is Disabled Connect to iTunes fix without restore problem from you.

3. By using the Recovery Mode on your iPhone –

By using the Recovery Mode in iTunes

*Use this solution if the iTunes Prompts for PassCode

” Forgot Passcode for iPhone

  • Turn your iPod completely OFF
  • Connect your iPod to your PC
  • Open iTunes there
  • Press & hold the Power & Home buttons simultaneously
  • Click on the ‘Restore‘ in the Window that appears in iTunes
  • Now, set up your iPod
  • After completing, close the tab
  • That’s it, done

By using the recovery mode in iTunes can also help you for fixing and solving this iPod is Disabled Connect to iTunes bypass problem.

4. By using the DFU (Device Firmware Update) Mode –

By using the DFU (Device Firmware Update) Mode

*Use this iTunes could not connect to the iPod touch method when if recovery mode does not work

  • Turn OFF your iPod completely
  • Plug into iPod into your PC & open iTunes
  • Press & Hold the Power button for 3 sec.
  • Continue holding the Power button & start pressing the Home button too
  • Now, hold both buttons for upto 10 sec.
  • Then, release the Power button now
  • Continue to hold the Home button for another 10 sec.
  • Click on ‘Restore‘ to start the restore process
  • Now, set up your iPod
  • After completing, close the tab
  • That’s it, done

By using the Device Firmware Upgrade (DFU) mode can also fix and solve this type of iPod is Disabled Connect to iTunes without iTunes problem permanently.

These are the quick and the best way methods to get quickly rid out of this iPod is Disabled Connect to iTunes iPod Device Error code problem from you entirely. Hope these solutions will surely help you to get back from this how to connect iTunes when iPod is disabled error problem.

Also, Check;

If you are facing or falling in this iPod is Disabled Connect to iTunes iPod Device error code problem or any error problem, then comment down the error problem below so that we can fix and solve it too by our top best quick methods guides.

Please Leave a Comment :-