Are you facing Windows Error 126 Code PC problem or getting this error problem on your PC again and again then today you are at the right place because we are here working for solving any error problems of the users.
This error is a very common error problem for the Windows PC users. This error is caused due to the antivirus software deleting the .dll file. This error problem is caused by Windows being unable to process correctly the appropriate settings that are required to load up. This error may have occurred due to the data corruptions. This Error Code 126 is not peculiar to any program’s installation part.
This shows an error code message like;
Error 126 The specified module could not be found
Causes of Windows Error 126 PC Code Issue:
- DLL files error
- Loadlibrary failed with error
- The specified module cannot be found
- Incorrect key file for table
You may also like;
- [GUIDE] How to Recover Deleted Data on iPhone Device (BEST METHODS)
- How to Fix Raidcall Error 22 Code Problem
- Fixed Error the wait Operation Timed out Code Problem
- How to Fix and Solve Error 103 Code Problem
- Fix Server Error 404 Page not Found Problem
So, here are some methods and the guide for fixing and resolve this type of Windows Error 126 Code PC problem from your Windows PC completely.
How to Fix & Solve Windows Error 126 PC Code Problem
1. Set Windows Defender to Run Automatically –
- Go to the start menu
- Search or directly go to the ‘RUN‘ there
- Type “service.msc” and click on OK
- Scroll down and locate & right-click on ‘Windows Defender.’
- & Select Properties there
- Under general tab & Startup Type drop down box
- Select “Automatic“option
- Click on Apply & then click OK
- After completing, close the tab
- That’s it, done
By setting up the Windows defender to run automatically can fix and solve this Windows error 126 code problem from your PC.
2. Run the sfc /scannow Command in the CMD (Command Prompt) –
- Start your Computer in Safe Mode
- Open Command prompt with administrative privilege
- Enter this ‘sfc/scannow‘ command there
- Wait for the scan to complete
- Find the Corrupt file
- Find a new copy
- Install the new copy
That’s it, done it will run an sfc scan on your PC for fix this Windows Error 126 problem.
3. Update your Windows Drivers –
- Go to the start menu
- Search or go to the Control Panel
- Scroll down & go to the ‘Windows Update‘ options
- Check for any newly available drivers are there any
- If any available then update it fast
- Or, you can set them as ‘Install updates automatically.’
- For that,
Go to the left side ‘Change settings‘ options - Click on it & opens it
- Click on the drop down menu there & select ‘Install updates automatically‘ option
- Now, Click on the OK button there to save it
- That’s it, done
By trying this above method and guide you will get to know about how to get back from this Diablo 2 Error 126 issue.
” OR “
- Go to the start menu
- Search or go to the ‘Device Manager.’
- Click on the driver who has error sign there
- Right click on it &
- Click on ‘Update Driver Software‘ option there
- Now, wait for some time for updating
- That’s it, done
By trying these, any two methods can also quickly fix this archeage Error code 126 problems.
4. By netsh Winsock reset Method in CMD (Command Prompt) –
- Go to the start menu
- Search or type cmd there
- Go to the cmd & right-click on it
- Then, click on ‘Run as administrator.’
- Type ” netsh Winsock reset ” & press enter there
- Restart your computer again
- That’s it, done
By netsh Winsock reset command, it will fix this Windows Error 126 problem.
5. Run a chkdsk /f Command in the CMD (Command Prompt) –
- Go to the start menu
- Search or go to the CMD (Command Prompt)
- A Pop-up will open
- Type “chkdsk” command there in the Cmd
- Press Enter to start it
- That’s it, done
By running a chkdsk command in the command prompt, you will quickly fix this Windows Error 126 problem.
6. Create a System Restore Point on your Windows PC –
- Go to the start menu
- Search or go to the ‘System Restore.’
- Clicks on it and open it there
- After that, tick on the “Recommended settings” or ‘Select a restore point‘ there
- After selecting, click on the Next option there
- Now, follow the wizard
- After completing, close the tab
- That’s it, done
By trying this tips, you will get rid out of this archeage Error Code 126 problem issue from your PC.
“ OR “
- Go to the start menu
- Search or go to the ‘System Properties.’
- Click on it and opens it
- After that, go to the “System Protection” option there
- Now, click on the “System Restore” option there
- & Create a Restore point there
- After completing, close the tab
- That’s it, done
Run a system restore and creating a new restore point by any of these two methods can solve this Windows Error 126 problem from your PC completely.
7. Turn OFF or Disable Windows Firewall Settings –
- Go to the Start Menu
- Go to the Control Panel
- Click on Windows Firewall there
- Click on ‘Turn Windows Firewall ON or OFF‘ feature there
- Tick on “Turn off Windows Firewall (not recommended)” there
- Now, Click on ‘OK‘ button there
- That’s it, Done
By turning off or disabling the windows firewall settings, it can fix this cryrendered3d9.dll Error code 126 problems.
These are some top best tips and tricks and the quick guides for fixing this Windows Error 126 Code PC problem from you permanently. Hope you liked this post, and these solutions will surely fix your this Error Code 126 problem.
Also, read;
- How to Fix Error Code 0x80004005 Problem
- How to Fix & Solve Error Code 0xc0000225 Problem
- Fixed Error DPC Watchdog Violation Code Problem
- Fixed Windows Error 0x80240017 Code Problem
- [GUIDE] How to Send Contacts from Android to iPhone Device
- [TIPS] How to Go Full Screen on Windows PC (Computer)
- [HOW TO] Do Call Forwarding iPhone 5 (Apple Device)
If you are facing this Windows Error 126 Code PC problem or any error problem while fixing and solving it, then comment down the problem below so that we can fix it too by our tricky guide solutions.
